Ruby Engineering Co.

A mild steel chain coupling is a mechanical device used to connect two shafts in order to transmit power or torque between them. It is typically used in industrial applications where there is a need to transmit rotational motion between two shafts that are not perfectly aligned.

Widely accepted star/ spider design.Low weight to high torque ratio.Easy for alignment. Ranging up to torque of 24 kg-m capacity.
  

Additional Information:

• Item Code: 4016
• Delivery Time: 4-5 DAYS
• Packaging Details: GUNNY BAG

A nylon gear coupling is a type of flexible coupling used to connect two shafts together while transmitting torque. It consists of two hubs with external teeth that mesh with a sleeve or spacer made of nylon material. The nylon sleeve acts as a flexible element that compensates for misalignment between the shafts and helps dampen vibrations and shock loads.

DGS Gear Coupling is a type of flexible coupling used in mechanical power transmission systems. Couplings are used to connect two shafts together in order to transmit power from one shaft to another. They compensate for misalignment, shaft end movement, and dampen vibration.

The DGS Gear Coupling is designed specifically for high-torque applications, where there is a need for transmitting large amounts of power between shafts. It consists of two hubs with external teeth and a sleeve with internal teeth. The hubs are connected to the respective shafts, and the sleeve fits between them.

CI stands for "Cast Iron," indicating that the coupling is made from cast iron material. Brake drum couplings are designed to connect two shafts together while providing a means of transmitting torque and accommodating misalignment between the shafts.

The coupling consists of two flanged halves, each with a series of internal fins or ridges that engage with corresponding fins on the opposite half. This arrangement allows for torque transmission while also providing flexibility to compensate for slight misalignment between the shafts.

A tyre coupling, also known as a tire coupling, is a type of flexible coupling used to connect two shafts together in mechanical power transmission systems. It is commonly used in various industrial applications, including pumps, compressors, conveyors, and other rotating equipment.

The primary purpose of a tyre coupling is to transmit torque from one shaft to another while accommodating slight misalignments, axial movement, and damping vibrations. It consists of two hubs or flanges, typically made of metal, which are connected by a flexible element known as a tyre.

A pump coupling, often referred to as a centrifugal pump coupling or CI (Cast Iron) pump coupling, is a mechanical device used to connect two shafts of a pump and a motor. It is designed to transmit the power from the motor to the pump while accommodating slight misalignments and reducing vibration.

The term "CI" in CI pump coupling stands for Cast Iron, which refers to the material used in the construction of the coupling. Cast iron is commonly used due to its strength, durability, and ability to handle high loads and torque.